Proscience Book a seat

Lecture 1 · P–N Junction Diode · Note · Free

P–N Junction Diode — Revised Comprehensive Illustrated Notes

P–N Junction Diode — Comprehensive Illustrated Notes
Learning goals: Explain formation of a p–n junction, diffusion, depletion layer, drift, barrier potential, equilibrium and energy needed to cross the barrier.
1. What is a p–n junction?

A p–n junction is the boundary between p-type and n-type regions of one continuous semiconductor crystal (usually Si or Ge). A practical junction is formed by appropriately doping different regions of the same crystal. Simply pressing separate p-type and n-type pieces together does not create the ideal junction discussed in the textbook, because an atomically continuous interface is required.

In p-type material, holes are majority carriers and electrons are minority carriers. In n-type material, electrons are majority carriers and holes are minority carriers. Doped semiconductor wafers are used to fabricate junction devices.

p-type regionn-type regionAcceptor dopantDonor dopantJunctionOne continuous Si or Ge crystal (schematic)
2. Why diffusion starts

Before equilibrium, holes are more concentrated on the p-side and electrons on the n-side. Because of the concentration gradient, holes diffuse from p→n and electrons diffuse from n→p. Diffusion means net movement from a region of higher carrier concentration to lower carrier concentration; it is not caused by an applied battery.

3. Formation of depletion region

Electrons and holes crossing the junction recombine with opposite carriers. Near the junction, this exposes immobile, negatively charged ionised acceptors on the p-side and immobile, positively charged ionised donors on the n-side. A narrow space-charge region, depleted of mobile majority carriers, develops. This is the depletion region (or depletion layer).

p-typen-type−+−+−+−+Built-in E ←Depletion layerFixed acceptor ions (−)Fixed donor ions (+)
Remember: The depletion region is not empty space; it contains the crystal lattice and fixed ionised dopant atoms, but very few mobile majority carriers.
4. Built-in electric field and drift

Because positive donor ions lie on the n-side and negative acceptor ions on the p-side, the built-in electric field points n→p. A hole (positive charge) experiences force along the field, n→p; an electron (negative charge) experiences force opposite the field, p→n. This electric-field-driven movement is drift, and it opposes the original majority-carrier diffusion.

p-regionn-regione⁻ diffusion ←hole diffusion →E field ←Drift: e⁻ → and holes ←; conventional drift current ←
Diffusion: holes p→n, electrons n→p. Drift: holes n→p, electrons p→n. Conventional diffusion current p→n; conventional drift current n→p.
5. Barrier potential VB

The separation of fixed charges creates an electrostatic potential difference across the depletion region called the barrier potential. It opposes further diffusion of majority carriers. The electric potential is higher on the n-side than on the p-side for the usual equilibrium p–n junction.

V_BVxx₁x₂Depletion regionpn

The diagram shows potential V versus position x. The dashed boundaries x1 and x2 mark the depletion layer. The increase in potential across it is VB. This is a qualitative schematic, not a scale drawing.

6. Energy needed to cross the barrier
VB = W/q   ⇒   W = qVB

For a carrier with elementary charge magnitude e, the characteristic barrier energy magnitude is W = eVB joules. If VB is expressed in volts, its numerical value corresponds to an energy in electronvolts for one elementary charge: for example, a barrier of 0.7 V corresponds to 0.7 eV.

Important distinction: Electron charge is −e, so signed electric potential energy changes obey ΔU=qΔV. The expression eVB describes the positive magnitude of the barrier energy, not the signed charge of an electron.

7. Equilibrium: why net current is zero

Diffusion tends to carry majority carriers across the junction; the built-in field causes drift in the opposite conventional-current direction. As the depletion region develops, the barrier increases until drift and diffusion currents are equal in magnitude and opposite in direction. Therefore an unbiased junction in thermal equilibrium has zero net current, although microscopic carrier movement continues.

Inet = Idiffusion + Idrift = 0
8. Exam-style questions and answers
Q1. From which process is the depletion region formed?
Answer: Diffusion of electrons and holes across the concentration gradient, followed by recombination, leaves fixed ionised dopants near the junction.
Q2. State the direction of the built-in field.
Answer: From the n-side (positive donor ions) to the p-side (negative acceptor ions).
Q3. What is barrier potential?
Answer: The potential difference across the depletion layer that opposes further majority-carrier diffusion.
Q4. A barrier potential is 0.6 V. Find the energy magnitude for one elementary charge.
Answer: W=eVB=(1.6×10−19 C)(0.6 V)=9.6×10−20 J=0.6 eV.
Study note: These figures are simplified conceptual diagrams. In the absence of external bias, the barrier is an internal equilibrium property; it is not a battery connected across the junction.

Come and see us

Message us on WhatsApp and we will answer the same day.