AC, AVC and MC — Revised Complete Illustrated Notes
AC, AVC and MC — Complete Illustrated Notes (Revised)
Average Cost (AC) = TC/Q; Average Variable Cost (AVC) = TVC/Q; Average Fixed Cost (AFC) = TFC/Q; Marginal Cost (MC) = ΔTC/ΔQ. Since TC=TFC+TVC, AC=AVC+AFC.
1. What each cost measures
AC is total cost per unit; AVC is variable cost per unit; AFC is fixed cost per unit; MC is the additional total cost of producing one more unit. In the short run, TFC is constant, so MC is also ΔTVC/ΔQ.
2. Textbook-style relationship diagram
Look at the two different minimum points: B is the minimum of AVC, where MC=AVC; A is the minimum of AC, where MC=AC. MC crosses AVC before AC as output increases. AC always lies above AVC because AFC is positive.
Schematic only: the positions of A and B indicate their respective minima. Curves are illustrative rather than plotted from a numerical cost schedule.
3. Three phases of MC relative to AC and AVC
Phase I — MC < average cost: When MC is less than AC, AC falls; when MC is less than AVC, AVC falls. A cheaper additional unit pulls the average down.
Phase II — MC = average cost: MC intersects AVC at AVC's minimum (point B), and intersects AC at AC's minimum (point A). These minima occur at different output quantities; they are not one common intersection.
Phase III — MC > average cost: When MC exceeds AC, AC rises; when MC exceeds AVC, AVC rises. A more expensive additional unit pushes the average up.
Important nuance: Between the minimum of AVC and the minimum of AC, MC is above AVC but still below AC. Consequently, AVC is rising while AC is still falling. Thus the three comparisons must be applied to each average separately, not treated as three perfectly simultaneous stages.
4. Why AC and AVC are U-shaped
In the short run, with some inputs fixed, the law of variable proportions explains the usual U-shape. Initially, better utilisation of fixed inputs and increasing marginal returns lower per-unit variable and marginal costs. Later, diminishing marginal returns mean extra output requires progressively more variable input, causing MC to rise and eventually pulling AVC and AC upward.
MC reaches its minimum before AVC and AC reach theirs. The MC curve cuts each average-cost curve from below at its minimum.
5. Why AC and AVC approach but never meet
The vertical gap between AC and AVC is exactly AFC: AC−AVC=AFC=TFC/Q. As Q rises, fixed cost is spread over more units and AFC falls. Therefore the curves become closer. For positive TFC and finite positive output, the gap remains positive, so AC and AVC do not intersect.
6. Worked numerical: AC, AVC and AFC
Question: TFC=₹100, TVC=₹200, output Q=10. Find AFC, AVC and AC.
Question: TC rises from ₹300 at Q=4 to ₹350 at Q=5. Find MC.
MC=(350−300)/(5−4)=₹50 per additional unit.
8. Exam-ready quick revision
Remember: MC below AC → AC falls; MC above AC → AC rises; MC=AC at minimum AC. MC below AVC → AVC falls; MC above AVC → AVC rises; MC=AVC at minimum AVC. AC>AVC by AFC; their gap narrows as Q increases.
Concept check: Can AVC rise while AC falls?
Yes. Between minimum AVC (B) and minimum AC (A), MC is above AVC but below AC. Hence AVC rises while AC falls.
Come and see us
Message us on WhatsApp and we will answer the same day.