Proscience Book a seat

Lecture 1 · Ch 9 Mechanical Properties of Fluids — Capillarity · Note · Free

Ch 9 Mechanical Properties of Fluids — Capillarity | Notes

Mechanical Properties of Fluids — Lesson: Angle of Contact, Meniscus & Capillarity

Physics 2028 | Based on supplied textbook pp. 10.57–10.59

1. Angle of contact (θ)
The angle between the tangent to the liquid surface at its point of contact and the solid surface, measured through the liquid, is the angle of contact.

It depends on the nature of the solid and liquid, cleanliness, surrounding medium and temperature. A wetting liquid such as water in clean glass has θ<90° (textbook approximately 8°) and a concave meniscus. Mercury in glass has θ>90° (approximately 138°) and a convex meniscus. Pure water in silver is given as θ=90° (plane meniscus) in the textbook.

2. Shape of the meniscus

At the three-phase contact line, the liquid–vapour (σLV), solid–vapour (σSV) and solid–liquid (σSL) interfacial tensions act. In ideal equilibrium, Young's equation is:

σSV = σSL + σLV cos θ
cos θ = (σSV − σSL)/σLV

If σSV>σSL, θ is acute and the meniscus is concave. If σSV<σSL, θ is obtuse and the meniscus is convex. Equal tensions give θ=90° and a plane surface.

Water: concaveMercury: convexθ = 90°: plane
3. Capillarity
Capillarity: Rise or fall of a liquid in a narrow tube relative to the liquid level outside, due to surface tension and wetting.

Examples: blotting paper absorbs ink; oil rises through a lamp wick; towels absorb water; sap rises through tiny plant passages (capillarity contributes, but transpiration is important for tall plants); a split pen nib draws ink.

Water risesMercury fallsh ↑h ↓
4. Derivation of ascent formula

For a capillary of radius r, liquid density ρ, surface tension σ, contact angle θ and rise h:

Vertical upward force along the circumference = 2πrσ cos θ. Weight of the liquid column (neglecting meniscus volume) = πr²hρg.

2πrσ cos θ = πr²hρg
h = 2σ cos θ/(rρg)

Equivalent pressure argument: pressure difference across a spherical meniscus is Δp=2σ/R; geometry gives r=R cos θ, so Δp=2σ cos θ/r. Equating Δp=ρgh yields the same result.

Dependence: h ∝ σ; h ∝ 1/r; h ∝ 1/ρ; h ∝ cos θ. A thinner tube gives a greater rise. For θ>90°, cos θ is negative, indicating capillary depression.

For a more precise treatment accounting for the volume of the meniscus in a narrow tube, the textbook gives h = 2σ cos θ/(rρg) − r/3 for a wetting liquid under its stated approximation.

5. Tube of insufficient height

If the tube is shorter than the predicted rise, liquid reaches the rim and its meniscus flattens (radius of curvature increases). It does not continuously overflow under static conditions. Since hR=2σ/(ρg) for the spherical-meniscus model, hR=h′R′; hence R′=hR/h′ >R when h′<h.

6. Worked examples
Example A: Water in a capillary of diameter 1.5 mm, σ=7.4×10⁻² N/m, ρ=1000 kg/m³, θ=0°, g=9.8 m/s². Find h.
r=0.75×10⁻³ m; h=(2×0.074)/(0.00075×1000×9.8)=0.02014 m ≈ 2.01 cm.
Example B: Liquid rises 7.0 cm in radius 0.1 mm, ρ=800 kg/m³, θ=0°, g=10 m/s². Find σ.
σ=h rρg/2=(0.07×10⁻⁴×800×10)/2=2.8×10⁻² N/m.
Example C: U-tube limbs have diameters 3.0 mm and 6.0 mm; σ=0.073 N/m, ρ=1000 kg/m³, θ=0°, g=9.8 m/s². Find level difference.
Δh=(2σ/ρg)(1/r₁−1/r₂)=(0.146/9800)(1/0.0015−1/0.003)=0.00497 m ≈ 4.97 mm. The narrower limb is higher.
Important numerical correction: The provided printed example appears to contain inconsistent arithmetic for this U-tube question; using the stated diameters and constants gives 4.97 mm, not 5.29 mm.
Formula & units

h,r,R in metres (m); σ in N/m; ρ in kg/m³; g in m/s²; θ in degrees.

Come and see us

Message us on WhatsApp and we will answer the same day.