Proscience Book a seat

Lecture 1 · Electric Current and Potential Difference · Note · Free

Notes — electric current and potential difference

1. Electric current

The flow of electric charges through a conductor, such as a metallic wire, makes up an electric current. It is like flowing water making a current in a river.

Definition
Electric current (I) is the rate of flow of electric charges across any cross-section of a conductor.
Formula
Electric currentI = Q / tQ = net charge in coulombs, t = time in seconds

2. Charge and the electron

  • An electron has a negative charge, e = 1.6 × 10⁻¹⁹ C.
  • The SI unit of charge is the coulomb (C).
  • 1 C is the charge on nearly 6 × 10¹⁸ electrons.n = Q / e = 1 / (1.6 × 10⁻¹⁹) ≈ 6.25 × 10¹⁸
Formula
Useful relationsI = Q / tQ = I × tQ = n × e

3. The ampere

Definition
One ampere (1 A) is the current when one coulomb of charge flows across a cross-section in one second.1 A = 1 C / 1 s = 1 C s⁻¹
Sub-unitValue
1 milliampere (1 mA)10⁻³ A
1 microampere (1 µA)10⁻⁶ A
Note
The ampere is named after the French physicist André-Marie Ampère (1775–1836).

4. Direction of current and flow of electrons

When electricity was first observed, electrons were not known, and current was taken as a flow of positive charges.

Flows fromFlows to
Electric current (by convention)Positive terminalNegative terminal
ElectronsNegative terminalPositive terminal
Remember
The direction of current is taken as opposite to the direction of flow of electrons. Both directions here refer to the external circuit.

5. Electric circuit and ammeter

Definition
A continuous and closed path of an electric current is called an electric circuit.
  • If the circuit is broken anywhere, such as when the switch is off, the current stops flowing.
  • Current is measured by an ammeter.
  • An ammeter is always connected in series in the circuit.

6. Potential difference

Charges do not flow in a conductor by themselves, just as water does not flow in a perfectly horizontal tube.

Important
Electrons move only if there is a difference of electric pressure, called the potential difference, along the conductor.
  • Water analogy: water flows from a tank at a higher level to the ground because of a pressure difference. Similarly, electrons flow only when there is a potential difference across the ends of a conductor.
  • Source: chemical action in a cell or battery creates a potential difference across its terminals, even when no current is drawn.
  • When the cell is connected in a circuit, this potential difference sets the charges in motion and produces a current.
  • To maintain the current, the cell uses up its stored chemical energy.
Definition
The potential difference between two points in a current-carrying circuit is the amount of work done in moving a unit positive charge from one point to the other.
Formula
Potential differenceV = W / QW = work in joules, Q = charge in coulombs

7. The volt and the voltmeter

Definition
One volt (1 V) is the potential difference between two points when one joule of work is done in moving a charge of one coulomb from one point to the other.1 V = 1 J / 1 C = 1 J C⁻¹
Note
The volt is named after the Italian physicist Alessandro Volta (1745–1827).
  • Potential difference is measured by a voltmeter.
  • A voltmeter is connected in parallel across the two points.

8. Quick comparison

Electric currentPotential difference
SymbolIV
FormulaI = Q / tV = W / Q
SI unitAmpere (A)Volt (V)
Measured byAmmeterVoltmeter
ConnectionIn seriesIn parallel

Come and see us

Message us on WhatsApp and we will answer the same day.